Injection molding industry for mold cooling with chiller 
 Melted by heating the plastic particles into the mold, after condensation, mold ejection molding plastic parts, in a continuous production process has required for cooling the mold to reduce the plastic setting time, improve accuracy of the workpiece size, shape quality, surface quality . 
 Cold water temperature requirements: 6 ... 18 ℃ 
 Cold water temperature requirements: ± 2K or ± 0.5K 
 Chiller cooling capacity and the amount of injection molding machines (usually referred to as "oz") related to the larger injection volume, the required cooling capacity is also large. 

 Injection molding machines with clamping force is usually the "tonnes" nominal, which requires the "tonnes" into "ounce", but "several tons" and "ounce" is not one to one, the following table only under normal conditions for the transition between up and down and have some bias. 
 Injection molding industry with a chiller unit features: 
 ① compressor Japan PANASONIC, DAIKIN, U.S. imports of industry-specific COPELAND and other new high efficiency compressor. 
 ② safe operation, high reliability, with high and low temperature and flow dual protection, water tank low level alarms, flow due to flow and water temperature is too high alarm output, filter drier refrigeration systems, circulating water filtration and other integrated protection devices. 
 ③ microcomputer PLC control system can precisely control the temperature at ± 1 ℃ (± 0.1 ℃) can control the machine running, fully functional in the wrong operating system; 
 ④ box structure, beautiful appearance, low noise.